An epoxy anti-static floor, inside the concrete surface suitable for building purposes to be anti-static electronics, microelectronics, aerospace equipment computer center space, precision instrument factory explosive environments Second, the function ◆ excellent antistatic effect is stable, ◆ lasting dust, moisture, abrasion ◆ can be divided into ordinary anti-static (thin coating) and self-leveling anti-static (impasto) Thickness: 2mm above three technical parameters Item Specification surface resistance testing standards primer ≤1X104Ω GB / T1410 thin coating ≤1X104Ω ~ 1X109Ω GB / T1410 impasto ≤1X106Ω ~ 1X109Ω GB / T1410 volume resistivity ≤1X104Ω ~ 1X109Ω GB / T1410 adhesion, grade ≤1 GB / T9286 Hardness, Shore hardness ≥80 GB / T6739 impact strength , kg cm 50 GB / T1732 tensile strength, Mpa ≥7 GB / T1731 Fourth, the construction process:? base surface treatment: according to the situation plain good grinding or sandblasting primer: a, Scratch antistatic primer required Surface resistance 1X104Ω following b, laying copper, interval 3m * 3m, vertical and horizontal cross-shaped form a network and coated connection locations: a, Scratch antistatic mortar b, anti-static putty knife top coat: brush, spray or steamed bread coated antistatic surface conservation Floor: 48 hours before the Master after 7 days before to achieve the best results (temperature 25 ° C prevail, at low temperatures, moderate to extend the opening hours of need).